Use a piezo buzzer with a Raspberry Pi

1. Overview

Piezo buzzers are basic components with versatility to emit tones, beeps, and even melodies. In this codelab, learn how to set up a piezo buzzer with your Raspberry Pi, and start making sound with just a few lines of code. Whether you're building a fun alert system or adding sound effects to a DIY project, you can integrate a piezo buzzer into your Viam project quickly using a prebuilt module.

close up view of piezo

What You'll Build

A passive piezo buzzer that can emit a tone and a melody.

piezo with megaphone

Prerequisites

A computer with MacOS, Windows, or Linux to flash your Raspberry Pi and configure the device's components using the Viam app
Hardware and supplies requirements
- 1 - Raspberry Pi 4
- 1 - microSD card to use with your Pi
- 1 - power supply for your Pi
- 1 - passive piezo buzzer
- 2 - jumper wires

What You'll Need

All the hardware components listed in prerequisites.
Sign up for a free Viam account, and then sign in to the Viam app

What You'll Learn

How to configure and test a device's components using Viam
How to use modules from the Viam registry
How to use pulse width modulation (PWM) to control the sound of a passive piezo

Watch the Video

See a demonstration sounding the piezo buzzer in this video.

2. Set up your Raspberry Pi

The Raspberry Pi boots from a USB flash drive (or microSD card). You need to install Raspberry Pi OS on a USB flash drive that you will use with your Pi. For more details about alternative methods of setting up your Raspberry Pi, refer to the Viam docs.

Install Raspberry Pi OS

Connect the USB flash drive (or microSD card) to your computer.
Download the Raspberry Pi Imager and launch it.
Click CHOOSE DEVICE. Select your model of Pi, which is Raspberry Pi 4.
Click CHOOSE OS. Select Raspberry Pi OS (64-bit) from the menu.
Click CHOOSE STORAGE. From the list of devices, select the USB flash drive you intend to use in your Raspberry Pi.
Configure your Raspberry Pi for remote access. Click Next. When prompted to apply OS customization settings, select EDIT SETTINGS.
Check Set hostname and enter the name you would like to access the Pi by in that field, for example, test.
Select the checkbox for Set username and password and set a username (for example, your first name) that you will use to log into the Pi. If you skip this step, the default username will be pi (not recommended for security reasons). And specify a password.
Connect your Pi to Wi-Fi so that you can run viam-server wirelessly. Check Configure wireless LAN and enter your wireless network credentials. SSID (short for Service Set Identifier) is your Wi-Fi network name, and password is the network password. Change the section Wireless LAN country to where your router is currently being operated.
Select the SERVICES tab, check Enable SSH, and select Use password authentication.
Be sure that you remember the hostname and username you set, as you will need this when you SSH into your Pi.
Save your updates, and confirm YES to apply OS customization settings. Confirm YES to erase data on the USB flash drive. You may also be prompted by your operating system to enter an administrator password. After granting permissions to the Imager, it will begin writing and then verifying the Linux installation to the USB flash drive.
Remove the USB flash drive from your computer when the installation is complete.

Connect with SSH

Place the USB flash drive into your Raspberry Pi and boot the Pi by plugging it in to an outlet. A red LED will turn on to indicate that the Pi is connected to power.
Make sure you are using a 5V 3A USB-C power supply to power your Raspberry Pi 4. Using a power supply with inadequate amperage can lead to instability, throttling, or unexpected behavior. Additionally, while USB boot is enabled by default on newer Raspberry Pi 4 models, older versions may require a firmware update to enable it. Refer to the Raspberry Pi documentation for detailed setup instructions and compatibility.
Once the Pi is started, connect to it with SSH. From a command line terminal window, enter the following command. The text in <> should be replaced (including the < and > symbols themselves) with the user and hostname you configured when you set up your Pi.
```
ssh <USERNAME>@<HOSTNAME>.local
```
If you are prompted "Are you sure you want to continue connecting?", type "yes" and hit enter. Then, enter the password for your username. You should be greeted by a login message and a command prompt.
Update your Raspberry Pi to ensure all the latest packages are installed
```
sudo apt update
sudo apt upgrade
```

3. Set up the hardware

Add your piezo buzzer

Connect the piezo buzzer: The passive piezo buzzer can be controlled via a GPIO pin on the Raspberry Pi. Refer to the following wiring diagram to connect the Raspberry Pi to the piezo buzzer.

wiring diagram

Pin 35 (GPIO 19) to Positive
Pin 39 (GND) to Negative

photo of webcam and piezo connected to Raspberry Pi

Now that we have physically connected our hardware components, let's configure the software in the next section.

4. Configure your machine and peripherals

Configure your machine

In the Viam app under the LOCATIONS tab, create a machine by typing in a name and clicking Add machine.
Click View setup instructions.
To install viam-server on the Raspberry Pi device that you want to use to communicate with and control your webcam, select the Linux / Aarch64 platform for the Raspberry Pi, and leave your installation method as viam-agent.
Use the viam-agent to download and install viam-server on your Raspberry Pi. Follow the instructions to run the command provided in the setup instructions from the SSH prompt of your Raspberry Pi.
The setup page will indicate when the machine is successfully connected.

Configure your Raspberry Pi board

To access the GPIO pins, let's add our Raspberry Pi board to our machine in the Viam app.

In the Viam app, find the CONFIGURE tab.
Click the + icon in the left-hand menu and select Component.
Select board, and find the raspberry-pi:rpi4 module. This adds the module for working with the Raspberry Pi 4's GPIO pins. Leave the default name board-1 for now.
Notice adding this module adds the board hardware component called board-1. The collapsible card on the right corresponds to the part listed in the left sidebar.
Click Save in the top right to save and apply your configuration changes.
Expand the TEST section of the panel to experiment with writing to physical pin 35. For example, try setting a High signal, along with 70% duty cycle and 1200 Hz frequency.
Since we are using a passive buzzer, you must provide a PWM (Pulse Width Modulation) signal to generate different tones. A constant high signal will not produce a sound as they would for an active buzzer, since passive buzzers require varying frequencies to produce audible tones.
Set the signal to Low to turn off the buzzer.

You can manually and programmatically use the GPIO pins of the board component to send PWM signals to control your buzzer. However, to streamline the following steps, let's use a prebuilt module from the Viam registry in the next section.

Configure your piezo buzzer

In the Viam app under the CONFIGURE tab, click the + icon in the left-hand menu and select Component.
Select generic, and find the buzzer:piezo module. This adds the module for controlling your buzzer. Name the component piezo.
In the new piezo panel, configure your component by adding the following attributes in the CONFIGURE field. This tells your piezo component to use a specific pin (physical pin 35) on a specific board (called board-1 in the Viam app).
```
{
  "piezo_pin": "35",
  "board": "board-1"
}
```
Select your board board-1 from the Depends on field.
Click Save to apply your configuration changes. This may take a moment.
Since we are using a generic component, let's test it out under the CONTROL tab. Find your piezo component on this page. Expand the DO COMMAND field, input the following code, and hit Execute.
```
{
  "sound_buzzer": {
    "frequency": 1200,
    "duration": 1.5,
    "duty_cycle": 0.7
  }
}
```
You are executing a DoCommand on a generic component that has been predefined to accept parameters such as frequency, duration, and duty_cycle.
Experiment with different values in those fields to see what happens when you execute the command again. If you have extra time, try sending the following Do command.
```
{
  "play_harry_potter": {}
}
```

What is the primary purpose for using PWM (Pulse Width Modulation) to control a passive piezo buzzer?

To provide a constant high voltage to the buzzer.To generate varying tones by controlling the frequency of the signal.To make sure the buzzer operates at a fixed tone without additional wiring.To power the buzzer directly from a USB port.

5. Next Steps

What you learned

How to configure and test a device's components using Viam
How to use modules from the Viam registry
How to use pulse width modulation (PWM) to control the sound of the buzzer

Building advanced scenarios with Viam and piezo buzzers

At this point, you have configured and tested your machine and piezo buzzer to make sound, but nothing is happening automatically. You can create automatic processes that trigger actions when certain conditions are met, such as in the following examples.

When a person is detected, as described in this workshop for People detection alert with Computer Vision
When air quality values reach a certain threshold, as described in this codelab to Automate air filtration with air quality sensors
When a QR code is detected, as described in this codelab to Use a QR code scanner

piezo enclosure

You can 3-D print a case for the Raspberry Pi that allows access to your GPIO pins for expanding your project (like this one here). You can also design and 3-D print a custom mount to hold your buzzer in place, or 3-D print a megaphone (like this one here) to amplify the buzzer volume.

In addition to the project ideas mentioned above, consider other ways to continue your journey with Viam.

Browse other modules in the Viam registry similar to the prebuilt module for the buzzer.
Learn how to create your own module with custom functionality for the piezo buzzer or other components and services.

Real-world applications and projects for piezo buzzers

Piezo buzzers are small, but mighty components used in industries requiring audible feedback, alerts, or tone generation. Their applications include:

Alarms and Alerts: Piezo buzzers create auditory signals in security systems, smoke detectors, and medical devices to notify users of critical events or malfunctions.
Interactive Robotics: Robots use piezo buzzers to provide audio feedback to signal a task is completed or to prompt user interaction.
Home Automation: Smart home devices and other consumer electronics utilize piezo buzzers for notifications, such as doorbell chimes, appliance alerts, or system warnings.
Gaming and Toys: Toys and games use piezo buzzers for sound effects and melodies, enhancing the interactive user experience.

Related Viam resources

Back